Ductless Mini Splits

Ductless Mini-Split Installation in Westchester County

Rebate-Ready Mini-Split Services Backed by 12 Years of Mechanical Engineering Experience

If you’re comparing contractors for mini split installation in Westchester County, here’s the difference worth knowing: we’re enrolled directly in New York’s Clean Heat program and work with Con Edison, so we handle the rebate paperwork as part of your installation. You don’t navigate the program on your own. At Zen Air Heating and Cooling, our team is fully trained, licensed, and insured, and our ownership includes a project manager with over 12 years of mechanical engineering experience informing system sizing and placement decisions.

We offer ductless mini-split installation, repair, replacement, and maintenance throughout Westchester County. Free consultations and estimates are available, and we don’t charge unless we do work. We also speak Spanish and are available for same-day, weekend, and emergency appointments.

Call Zen Air Heating and Cooling at (914) 293-5618 or contact us online to request your free estimate today.

Westchester Homes That Benefit Most from Ductless Systems

Westchester County’s housing stock is one of the most varied in the region. Pre-war Colonials and Tudors were built long before central air was standard. Mid-century ranches often have minimal ceiling or wall space for ductwork runs. Newer properties frequently include additions, finished attics, or converted rooms that fall entirely outside the original HVAC design. In all of these situations, extending traditional ductwork is either invasive, costly, or structurally impractical. Ductless systems require only a small wall penetration for refrigerant lines, which makes them a natural fit.

Some of the spaces we most often serve with ductless installations in Westchester homes:

Finished attics and upper levels where heat accumulates and existing supply vents can’t compensate
Above-garage bonus rooms that sit outside the home’s thermal envelope and swing dramatically with outdoor temperatures
Sunrooms and enclosed porches with large glass surfaces that traditional systems weren’t designed to handle
In-law suites and guest quarters that need independent temperature control without affecting the rest of the house
Home offices where consistent temperature matters throughout the workday

Multi-zone ductless configurations connect multiple indoor units to a single outdoor compressor, giving each space independent control. Modern cold-climate mini-split heat pumps also perform effectively well below freezing, so Westchester winters are well within their operating range for most households.

Ductless Mini-Split Services We Offer

We handle the full service range for ductless systems in Westchester County: new installation, system replacement, repair, and annual maintenance. Single-zone systems serve one room or defined space. Multi-zone configurations connect multiple indoor units to one outdoor compressor for multi-room or whole-home coverage. Indoor units are available in wall-mounted, floor-mounted, and ceiling-mounted configurations depending on your room layout and preferences.

A straightforward single-zone installation can often be completed in one day. Multi-zone projects or homes with older construction may require additional time, which a site assessment will clarify before any work begins. Our work is backed by a one-year warranty on labor and a 10-year warranty on parts and equipment, and we’re available for same-day, weekend, and emergency service appointments when something needs attention sooner.

Clean Heat Rebates & Long-Term Energy Savings for Westchester Homeowners

New York’s Clean Heat program runs through 2030 under a May 2025 Public Service Commission order, with Con Edison administering it throughout Westchester County. For qualifying full-load heat pump installations, rebates can reach $8,000 for most single-family homes or $10,000 for homes in Disadvantaged Communities, depending on project scope. Partial-load single-room systems aren’t an eligible category under the current program cycle, so the rebate available to you depends on how your installation is structured. Because we’re enrolled directly in the program, we handle the paperwork and apply the rebate to your installation invoice. You don’t file anything separately.

Beyond the upfront rebate, ductless systems eliminate the energy losses that come with traditional ductwork and let you condition only the spaces in active use. Zone control means you’re not heating or cooling unoccupied rooms. If financing would help make the project more accessible, we offer financing plans for modern HVAC equipment. We also stay current on EPA regulations covering refrigerant standards, efficiency requirements, and emissions as the industry continues to evolve.

Service Across Four States
Proudly serving NY, NJ, CT, and MA with reliable HVAC solutions and financing options that fit your budget.
Here for You All Week
We’re open seven days with weekend and same-day options to keep your home or business running smoothly.
Engineering-Driven Service
Benefit from 12 years of mechanical engineering expertise guiding every HVAC solution we deliver.
Clean Heat Rebate Help
We maximize your savings with expert guidance on NY’s Clean Heat Rebate and other efficiency incentives.

My sales rep, Jason, was fantastic!
“He was polite, knowledgeable, and extremely patient. He made sure to walk me through every detail, including how the rebate program works, which made the whole process simple and stress-free.”

- Sarah M.

View All Reviews

Understanding Mini-Split System Components

Ductless mini-split systems consist of a few core components that work together to deliver efficient, zone-controlled comfort. Knowing what each part does helps you understand what’s being installed and why it matters.

The main components of a ductless mini-split system:

Outdoor compressor unit. Sits outside the home and houses the compressor and condenser, handling the primary heating and cooling cycle. This is where most of the system’s mechanical work happens.
Indoor air handlers. Available in wall-mounted, floor-mounted, or ceiling-mounted configurations, these units deliver conditioned air directly into each zone. Multiple indoor units can connect to a single outdoor compressor in a multi-zone setup, giving each space independent temperature control.
Inverter-driven compressor technology. Unlike older systems that cycle fully on and off, an inverter compressor adjusts its output speed continuously to match demand. This improves efficiency and keeps temperatures steadier throughout the day.
4-way adjustable airflow. Directional louvers distribute air across the full space, reducing the hot and cold spots that fixed-direction vents leave behind.
Advanced micro-circuit technology. On-board electronics optimize performance and enable smart features including programmable schedules and remote or app-based control.
A2L refrigerants. New residential mini-split systems now use refrigerants such as R-32 or R-454B, which carry significantly lower global warming potential than R-410A. R-410A is no longer manufactured for new residential systems as of January 1, 2025, and under New York State law can’t be installed in new systems as of January 1, 2026.

Ready to move forward? Call Zen Air Heating and Cooling at (914) 293-5618 to request a same-day consultation and free estimate.

What to Expect from Our Installation Process

Every project starts with a free consultation. During that visit, we assess the spaces you want to condition, match system capacity and number of zones to how your household actually uses each area, identify the best indoor unit placement for even airflow, and determine the right outdoor unit position for service access and noise. We also flag any electrical panel or dedicated circuit requirements before work begins. Westchester homes with plaster walls or limited exterior access sometimes need more planning than newer construction, and we surface those factors at the site assessment stage rather than on installation day.

What Happens on Installation Day

On installation day, we protect floors and work areas, mount indoor unit brackets and air handlers, route refrigerant lines and condensate drains, set and secure the outdoor condenser, complete electrical connections, and run a full system test before walking you through the controls. Our ownership team brings over 12 years of mechanical engineering experience to sizing and placement decisions, so the setup you get reflects more than a standard template.

Most municipalities in Westchester County require a permit and inspection for mini-split installation. We handle that coordination as part of the project.

After Installation

Once the system is running, annual maintenance keeps refrigerant levels correct, coils clean, and controls calibrated. Between professional visits, cleaning the washable filters during heavy-use seasons helps support system performance.

Areas We Serve

Zen Air Heating and Cooling is proud to serve the Greater New York region and homes throughout the Tri-State Area.

Ardsley
Armonk
Bedford
Briarcliff Manor
Chappaqua
Dobbs Ferry
Eastchester
Elmsford
Fairview
Harrison
Hartsdale
Hastings-on-Hudson
Hawthorne
Irvington
Larchmont
Mamaroneck
Mount Kisco
Mount Vernon
New Rochelle
New York
Ossining
Pleasantville
Rye
Rye Brook
Scarsdale
Sleepy Hollow
Thornwood
Valhalla
White Plains
Yonkers

Contact the Experts Today!

At Zen Air Heating and Cooling, we're always ready to take your call! Give us a call at (914) 293-5618 or fill out the form below to contact one of our team members.

First Name
Last Name
Phone
Email
Address
Are you a new customer?
How can we help you?
By submitting, you agree to receive text messages from Zen Air Heating and Cooling at the number provided, including those related to your inquiry, follow-ups, and review requests, via automated technology. Consent is not a condition of purchase. Msg & data rates may apply. Msg frequency may vary. Reply STOP to cancel or HELP for assistance. Acceptable Use Policy